Home >

News

08Feb 2023

1 Set Of European Type Double Girder Overhead Crane Exported To Saudi Arabia

1 set of European type double girder overhead crane, equip with self-rotation hook Capacity: 5 ton Span length: 20m Lifting height: 9.5m Working duty: A5 Power source: 380V/60Hz/3Ph Indoor use The ...
30Jun 2022

Regular Inspection Procedures For Bridge Erecting Machine

The periodic inspection shall be carried out according to the inspection cycle specified by the manufacturer or according to the actual service condition of the bridge erecting machine. In addition...
28Jun 2022

Daily Inspection Procedures For Bridge Erecting Machine

At least the following daily inspections shall be carried out on the bridge erecting machine before each shift or each working day:
26Jun 2022

Measures To Prevent Overhead Crane From Crashing

1. Repair the lifting height limiter of the bridge crane in time. If it cannot be repaired or its performance is unreliable after repair, it should be scrapped and replaced. In addition, check the ...
24Jun 2022

Causes Of Overhead Crane Jacking

1. The limiter of the bridge crane is the main accessory responsible for controlling the operation of the hook of the bridge crane in the process of lifting and lowering. If the joint of the limite...
22Jun 2022

Precautions For Crane Assembly Of Bridge Crane

1. The middle position of the plant shall be selected for assembly and hoisting according to the plant equipment layout.
20Jun 2022

Assembly Process Of Overhead Crane Crane Crane

1. Walk the roller bar in the plant, pull the girder by the winch to the temporary track, turn the two girders into the installation position with a 20t truck crane, and hoist them onto the tempora...
18Jun 2022

Precautions For Cable Installation Of Gantry Crane

1. When installing the wire of gantry crane, the wire pipe can be fixed by electric welding.
16Jun 2022

Requirements For Cable Selection Of Gantry Crane

1. When the gantry crane adopts the hanging cable trolley (or cable guide car), the cable shall be prevented from being worn and excessively bent in motion. For cables with an outer diameter of no ...
14Jun 2022

Preventive Measures For Sliding Hook Of Gantry Crane

Adjust the brake clearance regularly and evenly according to the technical requirements of the brake product manual of gantry crane.
12Jun 2022

The Phenomenon And Cause Of Sliding Hook Of Gantry Crane

1. Slip hook during parking braking: the electrical control process stops, the motor stops, the brake brakes, and the goods slide more than 50 ~ 60 mm or fall out of control.
10Jun 2022

Maintenance Of Gantry Crane Hook

1. In order to prevent the hook from premature wear and tear, it is strictly prohibited to overload lifting during use;

First 123 Last 2/3

News

1 Set Of European Type Double Girder Overhead Crane Exported To Saudi Arabia

Regular Inspection Procedures For Bridge Erecting Machine

Daily Inspection Procedures For Bridge Erecting Machine

Measures To Prevent Overhead Crane From Crashing

Causes Of Overhead Crane Jacking

Precautions For Crane Assembly Of Bridge Crane

Assembly Process Of Overhead Crane Crane Crane

Precautions For Cable Installation Of Gantry Crane

Requirements For Cable Selection Of Gantry Crane

Preventive Measures For Sliding Hook Of Gantry Crane

The Phenomenon And Cause Of Sliding Hook Of Gantry Crane

Maintenance Of Gantry Crane Hook